Ray Delaforce
Software Engineer


Understanding Joint Efficiency and How to Apply It

Part 1: Joint Efficiency and Welded Joint Category


When correctly applied, joint efficiency determines the required thickness of a vessel component. This article concerns the principles applied by the ASME Section VIII, Division 1 pressure vessel code, because it is the most widely used code worldwide.

The application of joint efficiency is often misunderstood, and results in violations of the code, and even costly rework. This article attempts to clear away some of the misconceptions. We start off by defining the meaning of joint efficiency, denoted by the letter ‘E.’



That definition cannot be found anywhere in the code, but if you think about it, that must be the definition. We know the specified strength of the parent plate, because we can get it directly from the code (ASME Section II-Part D). But, how can we assess the strength of the weld metal? Actually, the code uses another method, but first we need to know a little more before we can apply a joint efficiency.

We need to know the meaning of these two terms first:
  • Weld CATEGORY
  • Weld TYPE

Read the rest of the article in the Insider Blog post.

Connect with Ray on LinkedIn: https://www.linkedin.com/in/raydelaforce.


Be a part of our community - join the PV Elite TUF Group.
Can PV Elite rename nozzles?

Yes. You can simply type in a new description. EASY!!


Then, if you want to see it on the 3D model or in actual dialog for peace of mind, on the right side tool bar:



See the Insider Blog post for a complete description.

Vol.2 | Issue 11 | November 2015
Get social with us!
Share this newsletter & let others get their own copy by clicking here to subscribe!
November 10 Webinar
What’s New in PV Elite 2016 10:00 AM CST

Register now